IWAKI PUMPS EWN-B09, Инструкция по эксплуатации

Страница: 63 / 108

63
Ope
ra
tio
n
2SHUDWLRQSURJUDPPLQJ
• WCT type
3URJUDPPLQJIRUEORZGRZQFRQWURO
Menu selection
Control parameter programming
Use keys
to enter value.
Use keys to scroll thorough menus.
Starting point
Enter a process
value to start
blowdown control.
These menus
appear when INT
is selected.
Stop point
Enter a process value to stop
blowdown control.
SPM setting
Program a spm that the pump
runs at.
INT or b.SYC
Select intermittent or blow sync
operation.
ON time setting
Program on time in INT operation.
OFF time setting
Program off time in INT operation.
Lockout time setting
Program delay time of pump
operation in blow sync operation.
Time limit setting
Program the maximum time
for the pump to run.
These menus
appear when b.syc
is selected.