IWAKI PUMPS EWN-B09, Инструкция по эксплуатации

Страница: 51 / 108

51
Ope
ra
tio
n
2SHUDWLRQSURJUDPPLQJ
Perform a calibration
Before calibration, program measurement conditions in the user mode. See
page 64 for detail. And then enter the calibration mode and calibrate this prod-
uct at each measuring object.
NOTE
(OHFWURGHVRUVHQVRUVWREHXVHGDQGFDOLEUDWLRQSURFHVVYDU\ZLWKDPHDVXULQJREMHFW
• Calibration for pH measurement (WPO type):
$XWR3WRU3WFDOLEUDWLRQDQG0DQ3WRU3WFDOLEUDWLRQDUHDYDLODEOH
• Calibration for ORP measurement (WPO type):
$VHQVLWLYLW\FKHFNDQGD0DQFDOLEUDWLRQLVDYDLODEOH
• Calibration for conductivity measurement (WEC/WCT types):
&HOOFRQVWDQWSURJUDPPLQJDQGPHDVXUHGYDOXHFDOLEUDWLRQLVDYDLODEOH
Ŷ 8VHRIDFRQGXFWLYLW\VHQVRU
• See the wiring section for connection. Always program the cell constant value tags
along each sensor.
• Do not extend or shorten the sensor cable. A cell constant may change and an error
may occur.
• Unscrew the top cover and rinse with tap water when cleaning. Use a neutral deter-
gent with a soft cloth as necessary.