IWAKI PUMPS EJ-B, Инструкция по эксплуатации

Страница: 28 / 56

28
Points to be checked
• An air bleed tube is connected to the pump.
Turn on power.
The LED lights and a display related to the
current mode appears on the screen.
* The pump waits in the MAN mode when the
power is turned ON with a default setting or calls
up the last selected mode or condition.
Use the UP key to set a stroke rate to 360spm.
• This programming is not necessary when the display already shows
360. Move to the next step.
• If the key is pressed and held, the spm will quickly increases to the
max rate.
Rotate the adjusting screw two revolutions
anticlockwise to open the air vent port.
* Do not rotate it three revolutions. Otherwise,
liquid may come out from the adjusting screw.
Before operation
2
1
3
Adjusting screw
Air bleed tube
LED
ON
START
STOP