IVT MTS-255-RC, Инструкция по эксплуатации

Страница: 6 / 76

6
EN
Instruction manual
PART LIST
1. Handle
2. On / Off switch
3. Lock-off button
4. Upper blade guard
5. Lower blade guard
6. Saw blade
7. Throat plate
8. Fence
9. Mounting holes
10. Miter angle indicator
11. Miter table
12. Base
13. Bevel locking lever
14. Dust extraction hole
15. Dust bag
16. Clamp hose
17. Clamp locking knob
18. Carbon brush cap
19. Miter locking knob
20. Bevel angle indicator
21. Motor casing
22. Locking lever
CONTENT OF THE BOX
Instruction manual (1 pc), spanner (1 pc), dust bag (1
pc), dust pipe (1 pc) .
INTENDED USE
The tool is intended for sawing solid wood, bonded wood,
glued veneer, materials similar to wood, and plastics.
Do not cut metals, ceramics or masonry products.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user’s manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙ Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙ Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is in use.
∙ The user is responsible for third parties while
working with the tool.
∙ People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
TOOL SPECIFICATIONS
Model MTS-255-RC
Voltage ~ Frequency [V ~ Hz] 230 ~ 50
Rated power [W] 1900
No-load speed [RPM] 5000
Blade diameter [mm] 255
Blade bore diameter [mm]
25.4
Nr. teeth of the blade
100
Tilting range - 45° / 0° / 45°
Weight [Kg] 15
Safety class
II