Ivoclar Vivadent Programat P300, Руководство по эксплуатации

Страница: 20 / 33

20
5.5 Settings / configuration and information
By pressing the "Settings" key (78), the following menu is displayed:
The left key (<) can be used to navigate through the information
menu. The right key (>) is used to navigate through the settings and
auxiliary programs. These displays can be aborted by pressing the
Program key or ESC key.
5.5.1 Settings / Configuration
Information Settings
Settings
Contrast
Temperature mode
User calibration
value
Volume
Beeper tune
Time
Date
Display Short description
The contrast can be
set by means of the
+ or – keys
The + and – keys can
be used to switch
from °C to °F
This program is
suitable to conduct
the temperature
calibration by means
of the Temperature
Checking Set Type 2.
The furnace head
opens automatically
if the Enter key is
pressed. Place the
test into the firing
chamber and start
the program by
means of the START
key.
The desired volume
can be set by means
of the + or – keys
The tune can be set
by means of the + or
– keys
The time can be
entered by using the
numeric keys
The date can be
selected by using the
numeric keys
Settings
Write protection
”Ivoclar Vivadent
optimized
temperature control
function“
Pre-drying
Vacuum test
program
Heating muffle test
program
Key test
Cleaning program
Dehumidification
program
Selection of factory
settings
Display Short description
The + and – keys can
be used to switch on
the write protection.
The function applies
to all programs and
cannot be individually
set.
Only after entry of
the user code.
Only after entry of
the STD code.
The + and – keys can
be used to switch on
the pre-drying func-
tion. The function
applies to all pro-
grams and cannot be
individually set.
Allows to check the
vacuum quality of the
system
Allows to check the
heating muffle. The
result is shown in
graphical form after
the end of the
program
Allows to check the
keypad
The program is used
to clean the heating
muffle and the
insulation materials
by a heat process.
Permits the
dehumidification of
the furnace
With this setting, all
values and para-
meters can be reset
to the factory
settings.
Attention :
All individual pro-
grams which have
been created and
saved will be deleted
with this function.