5
Cleaning
The incubator is made of ABS 2002 and the doors are
made of styrolux. The apparatus can be cleaned with
most customary cleaning agents and disinfectants.
Important:
Do not use solvents such as acetone or other
similar products!
Warranty and repair
The warranty for the Cultura incubator is two years from
the date of purchase. Malfunctions resulting from faulty
material or manufacturing errors are repaired free of
charge during the warranty period. In case of a claim
under warranty, the apparatus must be sent to the
dealer or directly to Ivoclar Vivadent AG in its original
packaging together with the purchase document. The
warranty does not cover any damage resulting from
wear under standard operating conditions, transport,
incorrect operation or improper handling.
Repair work may only be carried out by a certified Ivoclar
Vivadent Service Center. Use only original spare parts.
Disposal
The apparatus must not be disposed in the
normal domestic waste. Dispose of old units
according to the corresponding legal
requirements in your country.
Delivery form
Cultura incubator
Thermometer
Multirack sample holder
Power cord
Instructions for Use
Technical data
Operating voltage
220–240 V / 50/60 Hz
100–120 V / 50/60 Hz
Rated capacity
30 W / 0.2 A
Protection class II
Incubation temperature
+30 °C to +45 °C ± 1 °C
(+86 °F to +113 °F ± 34+F)
Thermometer display
up to +60 °C (+140 °F)
Outer dimensions
w x h x d: 310 x 155 x 168 mm
Inner dimensions
w x h x d: 220 x 120 x 150 mm
Weight
1.1 kg
Operating conditions
Temperature
+10 °C to +30 °C / +50 °F to +86 °F
Relative humidity
30% to 75%
Ambient pressure
700 hPa to 1060 hPa
Transportation and storage conditions
Temperature
–20 °C to +70 °C / –4 °F to +158 °F
Relative humidity
10% to 75%
Ambient pressure
500 hPa to 1060 hPa
This apparatus has been developed solely for use in
dentistry. Set-up and operation should be carried out
strictly according to the Instructions for Use. Liability
cannot be accepted for damage resulting from misuse or
failure to observe the Instructions for Use. The user is
responsible for testing the apparatus for its use and
suitability for the intended purposes.
Product specifications
