IVIGO EPK4550P05, Руководство пользователя

Страница: 17 / 52

17
EN
Access to the Settings Menu
In order to access to the settings menu, use the On/Off switch on the side to turn off the device. Press
and hold the power button while switching on the unit from the side. To turn off the device, please
use the power switch on the side. To switch on, press and hold the power button . The device display
shows the first option available in the menu. You can switch between the options with the and
buttons. To see and edit the details of an option that appears on the screen, press and hold the power
button for 3 seconds. To save the changes, press and hold the power button for 3 seconds. To exit
without saving, turn off and back on the device via the On/Off switch on the side.
Menu
PtyP => Program Settings (daily/weekly)
tSEt => Setting Time and Day
hSEt => Weekly Program Setting
ASEt => Adaptive Start Parameters
oPEn => Heat Loss Detection Parameters (Windows, doors, etc. left
open)
AnFr => Anti-Frost Setting
uEr => Software Version Monitoring
CodE => Key Code
CCod => Erasing the Key Code
CntC => Temperature Calibration
CLdr => Display Brightness Adjustment
Program Type Settings
There are two program types: daily and weekly. Only one program type can be set at any time. The daily
program is used for turning on/off the device at the end of a preset period. The weekly program is used
for setting the temperature level at a given time. The unit is set to daily programming by default. To
change the program type, go to the Settings menu. Proceed with the and buttons until “PtyP”
appears on the screen. Press and hold the the power button for 3 seconds Switch between the daily
(“d_Pr”) and weekly (“h_Pr”) options with and buttons. To choose a program, press and hold
the power button for
3 seconds when it appears on the screen (“d_Pr” for daily, “h_Pr” for weekly). On the display appears
“donE” and the device goes back to its regular operation. This notification informs that the setting is
completed and saved.
Daily Program
The device has the daily program type activated by default unless changed. The daily program enables
a power-off delay if the device is on, and a power-on delay if it is off. The maximum power-on delay
allowed is 48 hours, while the maximum power-off delay is 8 hours. To switch to this mode, go to the
Settings menu, select “PtyP” and then “d_Pr”. (cf. Program Settings). When the device is on, press and
hold the time button and set the hours of delay. For instance, if the power-off delay is set to 3 hours, the
display reads ”03of”.