iVex Indusvision IVEX-FZ, Руководство пользователя

Страница: 13 / 16

13
6. Checklist Before Installation
No. Check Point Check
1
Please use the power supply (SMPS) that is supplied from factory or your
provider and be careful to connect specification of the power supply.
(DC24V, AC220V / AC110V)
2
Please connect exactly polarity (+/-) of the Data Cable (RS-485).
3
Please check the video quality by connecting video cable(BNC Connector)
to DVR or Monitor.
4
After connecting CAT. 5 cable (RJ-45 Jack) to network port, please check the
video, data control and other conditions in the normal network condition.
5
Please set the protocol and baud rates as following:
- Protocol/Baud Rate : Pelco-D / 9600 bps
- ID Address : No. 1 (Default)
6
In IP Network Camera, please set and save exactly PELCO-D, 9600 bps and
ID Address in the supplied CMS or NVR software.
7
Check WIPER operation (Left/Right)
(Press No.85 and Preset-key: ON, Press No. 69 and Preset-key : OFF)
1. When you receive, please check the product according to the following checklist before
installation in the site and if you find the normal for all, please install the goods.
2 . Please be noted it could be charged for some service if you don’t remind the checklist.
(Please contact to
info@indusvision.co.kr
or following phone number, if you have troubles
out of check list.)
INDUSVISION INC / CS Technical Team : +82-32-623-0750