Right hand installation shown;
left hand opposite
26673 Rev. 3
It is very important for installer to verify that center line of top pivot point lines up
with center line of bottom pivot point before final installation. Heel edge of door
must be beveled 1/8” in 2” as shown below.
NOTE
!
Mortise depth for pivot leafs is 3/8”.
NOTE
!
Door Leaf
Bevel heel edge of
door 1/8” in 2” with
3/16” rad, typ
1-3/16”
30 mm
3/4”
19 mm
Frame Leaf
1/16”
2 mm
typ
13/16”
21 mm
*
1-1/4”
32 mm
*
1/8”
3 mm
typ
These dimensions apply to industry standard
1-3/4” door in a 1-15/16” rabbeted frame. For
other frame conditions, locate frame leaf of
pivot identical to door leaf as shown below.
*
26673-00
