21
POWER LIMITATION WHILE DRIVING
Vehicle can limit motor power due to different factors
-
Vehicle was not plugged in and battery temperature
dropped below -10 C. Vehicle will automatically switch
to hybdrid mode and heat batteries.
-
State of charge is lower than 10%
-
If state of charge drops to 0% - vehicle will start the
engine and drive on charge mode.
-
Motor, battery or motor controller temperatures are
too high.
-
Battery voltage is too low.
-
Vehicle stability control was activated due to wheel
slip (temporary power reduction).
POWER LIMITATION WHILE BRAKING
-
Regeneration is turned off from 100% to 95% SOC.
-
From 95% to 85% regeneration increases gradually.
-
Regenration can be cut off if stability control is
activated and wheel slip is detected.
POWER LIMITATION WHILE CHARGING
Charging power can be limited due to different factors
-
Selected lower power charging cable than 16A
-
Battery temperature is high
-
Battery temperature is too low
-
Charger temperature is too high
HYBRID SYSTEM LIMITATION
In case of critical system failure
–
iPHEV drive system can
be disengaged.
To manually disengage the system:
-
Enter SAVE mode
-
Hold SAVE mode button for 5 sec
-
Message “iPHEV system disengaged”
should be seen.
POWER LIMITATION
Содержание DAILY PHEV-120 2018
Страница 3: ...3 ev elinta lt 370 37 351 987 ...