Iveco Motors N45 MNA M10.00, Использование и обслуживание, Страница: 21 / 36

20
FREQUENCY
The maintenance intervals indicated below take into account the
typical working factors for various types of engine use; the most
suitable interval for maintenance operations for the various
applications will be indicated by the maintenance staff, according to the
way and working conditions in which the engine is used.
CAUTION!
Do not carry out maintenance operations when the
electric power supply is turned on: always check to ensure
that the appliances are properly earthed. During diagnosis
and maintenance operations, make sure that your hands
and feet are dry, and whenever possible use insulating
stands.
Controls Frequency
Check oil level in engine Daily
Check oil level in marine gear Daily
Check engine coolant level Daily
Check exhaust pipe/s for damage Daily
Drain water from the fuel filter or
pre-filter 150 hours
(1)
Check/top up electrolyte level in batteries and
clean terminals
Half-yearly
Planned maintenance
Frequency
Clean air filter/s 300 hours
(2) (7)
Check corrosion of zinc anodes 300 hours
(4) (7)
Check state of oil vapour filter
(for engine N67 MNT M28) 300 hours
(7)
Drain/suck condensation from fuel tank/s 300 hours
(1) (7)
Replace engine oil 600 hours
(5) (7)
Change oil filter/s 600 hours
(5) (7) (8)
Change fuel filter/s 600 hours
(1) (7) (8)
Change fuel pre-filter 600 hours
(1) (7)
Change oil in the marine gear see relevant details
Inspect sea chest yearly
Check tension and state of belt yearly
(3)
Change coolant 1200 hours or 2 years
Change air filter 2 years
Change oil vapour filter
(for engine N67 MNT M28) 2 years
(5)