!
Overload Alert Value Input
(Optional)
As soon SkidWeigh system weighing function calibration is done the
loaded forks must be
lowered to ground
.
The
Mode 7
digit automatically will be shown and will remain on LED display until overload alert
value is inputed into the system. With LED display showing “
Mode 7
” you have to enter the
overload alert value for that vehicle / application. In our example we will enter the overload alert
value of
4500
.
Use paper clip to access buttons
“M”
and
“Arrow Up”.
Make sure
0
number is inputed for digit
5
.
(
In our example for overload value of 4500 has only 4 digits
)
As soon the last digit is inputed into the system
Mode 7
will change to
Mode 8
which is the
normal operational mode
Example:
If the lifted load is above preset overload value of 4500 the LCD display will
* Show actual overload value
* LED display showing the overload value will “flash”. (Optional buzzer will be activated as well)
* Overload value alert will stop “flashing” when
loaded forks are lowered to the ground.
Mode
Digit 5
Digit 4
Digit 3
Digit 2
Digit 1
7
0
7
0
7
5
7
4
7
0
Integrated Visual Data Technology Inc., 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
