Preparation
Set the drain hose to drainage.
Plug the power supply cord into an AC outlet with voltage corresponding to the rating label of the appliance. To reduce risk of electric shock,
plug into a ground fault circuit interrupter (GFCI) outlet.
Insert the water inlet hose into water inlet connector.
Refer to the water level mark and select the water level according to the volume of laundry to be washed.
Operation
Wash
Connect drain hose and water inlet hose as described.
Fill with clean water to desired water level
Use cold or room-temperature water
Dissolve laundry detergent in water before adding to the machine
Turn the WASH knob to stir in the dissolved detergent
Put laundry into machine
Use the timer to select washing duration
Select the appropriate wash mode (normal or strong) by turning the NORMAL/STRONG/DRAIN knob. Washing will begin.
Drain
When washing or rinsing is complete, turn the selector knob to the DRAIN position to activate the pump. IMPORTANT! –Turn the knob back to
NORMAL when draining is complete.
Intermediate Spin
Move laundry from the wash tub to the spin tub. Arrange laundry uniformly so that the weight is evenly distributed. An unbalanced tug may cause
vibration and noise.
Press the laundry down firmly and place the safety cover on top.
Close the outer cover of the spin tub and spin laundry for 1 minute to extract excess water.
Soak/Rinse
Place laundry into wash tub. Set the timer for 1 – 5 minutes. Select water level and wash mode. Let rinse. Drain water.
Spin Dry
Move laundry to the spin tub. Arrange laundry uniformly so that the weight is evenly distributed. An unbalanced tug may cause vibration and noise.
Press the laundry down firmly and place the safety cover on top.
Close the outer cover of the spin tub and spin laundry for 1 – 5 minutes. (Spin duration: 1 minute, 3 minutes, 5 minutes.)
If abnormal noise or vibration occurs, open the spin tub cover and rearrange the laundry. Resume operation.
Wash Water Inlet
Spin Water Inlet
Water Tap
Water Inlet
Water Tap
2
