background image

Cleaning and Maintenance

Unplug the washer from the power supply.

Clean the machine with a soft damp cloth.                 

Do not spray water directly onto the machine. If the machine becomes too soiled, add a mild detergent to clean. Do not use petroleum-based 
detergent to clean the machine.

There will be lint left behind in the overflow filter and the lint filter after each use. These filters need to be cleaned frequently in order to maintain 
optimal performance of the machine.

Cleaning the Lint Filter

IMPORTANT! – The lint filter must always be in place during washing, and must be cleaned immediately after each use.

Hold the filter frame as shown. Gently press down and pull off.

Wash the filter while it is still wet. Wash only with plain water. Let filter air dry. Do not dry under direct sunlight.

To reinstall the filter, insert the bottom part of the filter frame into the slot, then gently push the filter in to place.

 

Cleaning the Overflow Filter

Clean the overflow filter at least once every 2 months.

Dismantle the overflow filter. Pinch the flexible-fastening claw; pull it gently away from machine 
as shown.

Dismantle the bellows. Dismantle the top of the pipe in the overflow filter. Clean the filter under 
running water.

Reinstall the bellows: 

Insert the tie plate of the bottom of valve cover.    

Put up the hook at the left top.

Press the top to the slot as shown in picture.

TROUBLESHOOTING

 

Lint Filter

Do not pull on the pipe

Water level
adjuster

Bellows

PROBLEM

 

CHECK FOR POSSIBLE CAUSE

 

 The machine does not work 

Is the power supply on? 
Is the power supply cord connected to an outlet?  
Has laundry inside the machine become tangled in the 
pulsator? 

 Unable to drain 

Has the drain hose been lowered? 
Is the drain hose frozen? 
Is the drain hose blocked? 
Have any clothes fallen outside of the spin tub? 

Anormal sound while washing 

Are there any loose articles in the wash tub  
  

Not enough water in wash tub  

Is the bellows of the overflow filter being installed 
correctly? 

Abnormal sound and vibration while 
spinning 

Is the machine placed on a flat, level surface? 
Is the safety cover correctly on top of laundry in the 
spin tub? 
Have any clothes fallen outside of the spin tub? 
Are there too many clothes in the spin tub? 

 

3

Содержание IVAPWS15WT

Страница 1: ...ck To reduce the risk of electric shock do not attempt to disassemble or alter this device There are no user serviceable parts This product is intended for private domestic use only It is not intended for any commercial trade use Use this product only for its intended purpose Never allow children to have access to this equipment Do not plug into an outlet being used by another appliance Never put ...

Страница 2: ...n the selector knob to the DRAIN position to activate the pump IMPORTANT Turn the knob back to NORMAL when draining is complete Intermediate Spin Move laundry from the wash tub to the spin tub Arrange laundry uniformly so that the weight is evenly distributed An unbalanced tug may cause vibration and noise Press the laundry down firmly and place the safety cover on top Close the outer cover of the...

Страница 3: ...e the overflow filter Pinch the flexible fastening claw pull it gently away from machine as shown Dismantle the bellows Dismantle the top of the pipe in the overflow filter Clean the filter under running water Reinstall the bellows Insert the tie plate of the bottom of valve cover Put up the hook at the left top Press the top to the slot as shown in picture TROUBLESHOOTING Lint Filter Do not pull ...

Страница 4: ...h Motor Rated Power 480W Spin Motor Rated Power 220W Waterproof Rating IPX4 Customer Service info myivation com 866 849 3049 Wiring Diagram Distributed by C A Marketing 114 132 Tived Lane East Edison NJ 08837 USA info myivaton com Made in China Ivation is a trademark of C A IP Holdings LLC 2016 All rights reserved 4 ...

Отзывы: