3. Set the heater’s thermostat by pressing the arrows on
the control panel (Figure C) or the TEMP UP or TEMP
DOWN buttons on the remote control (Figure B).
You can set the temperature anywhere between 50° F
and 90° F (10° C and 32° C). Once you have chosen the
desired temperature, the heater will remain on until
the room temperature increases to the temperature
on the heater’s digital display. The heater will cycle on
and off to maintain the desired room temperature.
Press the C°/F° button on the control panel (Figure C)
to switch the digital display indicator on the heater
between Fahrenheit and Celsius.
4. To set the timer-power-off-mode, start the unit and
press the TIMER button on either the control panel
(Figure C) or remote control (Figure B).
Note: The timer-power-off-mode can only be set when
the heater is on.
The digital display on the control panel (Figure C)
changes from the temperature to a time value for the
timer. Press the TIMER button repeatedly to change
the number value between 0 and 12 hours (in one
hour
intervals).
The Timer light turns on when the timer is set.
5. To set the timer-power-on-mode, while powering off
the unit, press the TIMER button on the panel
(Figure
C).
Note: The timer-power-on mode can only be set when
the heater’s power is off.
The digital display on the control panel (Figure C)
changes from the set temperature readout to a time
value for the timer. Press the TIMER button
repeatedly to change the number value between 0
and 12 hours (in one hour intervals).
The Timer light turns on when the timer is set.
6
3
C
C
B
TEMP.
UP
ºC/ºF
TEMP.
DOWN
OR
4
C
B
TIME
TIMER
5
C
B
TIME
TIMER
