background image

5

5200199 Rev. F

One-Point Ionizer with S Power Supply

5.   If no spark occurs and no arcing is heard, the trouble is in the power supply.  If a spark 

does occur the fault is in one or more of the ionizers.

To find the faulty Ionizer or Ionizers:

1.  Turn OFF current to power supply.
2.   Insert the high voltage cable from one of the ionizers into the exposed hole of one of 

the plastic receptacles and screw knurled plug FINGER TIGHT ONLY.

3.  Turn on the current to the power supply.
4.   Check the ionizer with the Simco-Ion voltage detector.  If it does not light, this is the 

faulty ionizer.  If it does light, add the other ionizers to the power supply until the 

voltage detector fails to light.  The faulty ionizer should be replaced.

5. WARRANTY

This product has been carefully tested at the factory and is warranted to be free from 

any defects in materials or workmanship.  Simco-Ion will, under this warranty, repair 

or replace any equipment that proves, upon our examination, to have become defective 

within one year from the date of purchase.
The equipment being returned under warranty should be shipped by the purchaser to 

Simco-Ion, 2257 North Penn Road, Hatfield PA 19440, transportation prepaid and insured 

for its replacement cost.  Prior to returning any goods for any reason, contact Simco-Ion 

Customer Service at (215) 822-6401 for a Return Authorization Number.  This number 

must accompany all returned items.
This warranty does not apply when the equipment has been tampered with, misused, 

improperly installed, altered, has received damage through abuse, carelessness, accident, 

connected to improper line voltage, or has been serviced anyone other than an authorized 

factory representative.
The warranty does not apply when Simco-Ion parts and equipment have been energized 

by other than the appropriate Simco-Ion electrostatic charging generator or generator, or 

when a Simco-Ion electrostatic charging generator or generator has been used to energize 

other than Simco-Ion parts and equipment.  Simco-Ion makes no warranty, expressed or 

implied, nor accepts any obligation, liabilities, or responsibility in connection with the use 

of this product other than the repair or replacement of parts stated herein.

Содержание Simco ION









Отзывы:

Похожие инструкции для Simco ION