6. TOOL CARE, MAINTENANCE & PARTS REPLACEMENT
!
!
!
!
Take good care of the tool. Inspect and clean it daily, lubricate it weekly and adjust
when necessary. Replace any worn or broken parts.
!
!
!
!
ALWAYS disconnect the pneumatic connection to the tool when performing part
removal and/or replacement procedures. NEVER connect a pneumatic source to a
disassembled tool unless otherwise specified.
7. WORK AREA.
Keep work areas uncluttered and well lighted.
Several combinations of strap, seals and tools can be used with this tensioner. Use the correct
Acme products for your application. If you need help contact your Acme Representative.
SAFETY PROCEDURES FOR TOOL OPERATION
Before using this tool, read its Operation and Safety instructions.
!
!
!
!
Do not exceed the operating air pressures stated elsewhere in the manual.
!
!
!
!
Use a Acme approved filter-regulator-lubricator unit.
!
!
!
!
Never operate a pneumatic tool with a bottled air or gas source.
!
!
!
!
For tension adjustments, follow instructions in this manual. For all other adjustments,
repairs or cleaning of the tool, disconnect air supply.
!
!
!
!
Properly crimp or notch the seal(s).
!
!
!
!
Tuck strap end back into the dispenser when not in use.
CUTTING TENSIONED STRAP
Use only cutters designed for cutting strap; never use claw hammers, crowbars, chisels, axes or
similar tools. Such tools will cause the strap to fly apart with hazardous force. Before using any
Acme product, read its Operation and Safety Manual.
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM
