2
USER MANUAL SPIKA
(1) Packing:
On the outside, it contains a label with the manufacturing number.
(2) Exterior of the equipment:
On the back of the equipment, there appears a label with the same characteristics as
the previos one.
(3) Nameplate:
On the back of the machine.
Check that in interior of the machine the installation kit is complete and comprises:
• Scoop, drain hose, four legs and manual.
• Warranty and serial number
CAUTION:
All packing elements (plastic bags, carton boxes and wood pallets) should be kept outside the reach of
children, as they are a source of potential hazard.
Installation
(1) LOCATION OF ICE MACHINE
This ice maker is
not
designed for outdoor operation. The icemaker should not be located next to ovens, grills or other
high heat producing equipment.
The SPIKA machines are designed to operate at room temperature between 41ºF (5ºC) and 109.4ºF (43ºC). There may
be some difficulties in ice slab removal under the minimum temperatures. Above the maximum temperature, the life of
the compressor is shortened and the production is substantially lower.
The air cooled SPIKA NG (undercounter) ice makers take the air through the front section, and drive it off through the
lateral, back and also front louvers due to their new oblique condenser structure and placement. Do not place anything
on the top of ice maker or facing the front grille. In case the front grille is either total or partially obstructed, or due to
its placement it receives hot air from another device, we recommend, in case it is not possible to change the location, to
install a water cooled machine.
Содержание spika
Страница 60: ...COD 6487_27 04 2017 ...
