ITV DHD 200-30, Руководство пользователя

Страница: 11 / 17

11
ENGLISH
Clean the outside of the machine as often as necessary to maintain cleanliness, with mild soap and water.
Wipe dry with a clean soft cloth. Stainless steel parts can be cleaned with specific products, take care
especially to not touch the plastic parts.
2. AGITATOR AND PADDLE WHEEL DISASSEMBLY
Keeping the wheel still, rotate the agitator CW, and then push it opposite to the wheel until the end
becomes free. Afterwards pull the agitator to release the opposite side. Once the agitator is disassembled,
the wheel can be easily extracted from its location.
Proceed in reverse to mount it again.
CAUTION: Do not force or lever up the agitator or the wheel during these operations.
3. FRONT PANELS DISASSEMBLY
To access the dispensing mechanisms, the automatic agitation timer or the drain bin, it is necessary to
disassemble the front panels.
Start by disassembling the upper front panel, by unscrewing the 2 Phillips screws located in the inside of the
plastic front panel (see figure). Once removed, slide the panel upwards to remove it completely.