background image

Technical Manual No. IOT1000P

Effective 8/31/2018 

REV LEVEL B

  

ITT Engineered Valves, LLC

 

33 C

ENTERVILLE

 R

OAD

 

L

ANCASTER

, PA  17603-2064 

T

EL

: (717) 509-2200 

F

AX

: (717) 509-2336 

www.engvalves.com 

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS 

MODEL T1005, T1006, T1007 & T1008 

SKOTCH

 TRIFECTA

 OIL VALVE SYSTEMS 

WARNING 

Valves and valve actuators supplied by ITT Engineered Valves, LLC are designed and 
manufactured using good workmanship and materials, and they meet the applicable 
industry standards. These valves are available with components of various materials, and 
they should be used only in services recommended herein or by a company valve engineer. 
Misapplication of the product may result in injuries or property damage. A selection of 
valve components of the proper material consistent with the particular performance 
requirement, is important for proper application. 

Examples of the misapplication or misuse of a valve or valve actuator includes use in an 
application that exceeds the pressure/temperature rating, or failure to maintain the 
equipment as recommended.

 

Содержание SKOTCH TRIFECTA T1005






































Отзывы: