ITT NEO-DYN 100T, Инструкция по установке и эксплуатации, Страница: 8 / 14

Enclosure 6N Temperature switches Page 5
ELECTRICAL CONNECTIONS
An internal terminal block is standard, with a green screw for attaching the ground wire.
See Figure 2 and Figure 3
WARNING All field wiring must comply with requirements of the NEC or applicable local or
national electrical codes, including wire gauges and insulation temperature ratings.
Conduit seals may be required.
Figure 2. Form C and CC Schematics Shown Below the Decreasing Setpoint
Figure 3. Form Z Schematic Shown Below the Decreasing Setpoint
RED NC1
BRN C1
BLU NO1
BLK NC2
YEL C2
VIO NO2
GRN
SCREW
RED NC1
BRN C1
FORM CC FORM C
GRN
SCREW
NC BLK
GRN
SCREW
NO VIO
RED NC
BLU NO