ITT Engineered Valves BioviZion, Инструкция по установке, эксплуатации и обслуживанию, Страница: 6 / 32

2 Transportation and storage
2.1 Handling and unpacking guidelines
CAUTION:
Always observe the applicable standards and regulations regarding the prevention of accidents
when handling the product.
NOTICE:
Valve shipped with thermal compensation system dis-engaged. Tighten valve bonnet per in-
struction manual prior to pressurizing the valve. For additional information go to www.eng-
valves/envizion.html or contact ITT at 717-509-2200.
Handling guidelines
Follow these guidelines when handling the product to prevent damage:
• Use care when handling the product.
• Leave protective caps and covers on the product until installation.
Unpacking guidelines
Follow these guidelines when unpacking the product:
1. Inspect the package for damaged or missing items upon delivery.
2. Note any damaged or missing items on the receipt and freight bill.
3. Do not lift or pull on the electrical conduit lines. Doing so may cause the POC switches to come
out of calibration.
2.2 Storage, disposal, and return requirements
Storage
If you are not immediately installing the product after delivery, store it as follows:
• Store the product in a dry room that maintains a constant temperature.
• Make sure that the products are not stacked on top of one another.
• Store assembled valves with the thermal compensation system disengaged to prevent diaphragm
damage.
Disposal
Dispose of this product and associated components in compliance with federal, state, and local regula-
tions.
Return
Ensure these requirements are met before you return a product to ITT:
• Contact ITT for specific instructions on how to return the product.
• Clean the valve of all hazardous material.
• Complete a Material Safety Data Sheet or Process Data Sheet for any process fluid that could re-
main on the valve.
2 Transportation and storage
4 EnviZion and BioviZion Valves Installation, Operation, and Maintenance Manual