ITT Corporation
3878 S. Willow, Suite 104
Fresno, CA 93725
Tel: (559) 265-4730 (800) 554-6853
Fax: (559) 265-4740 (800) 453-7523
www.lainginc.itt.com
Copyright © 2009 ITT Corporation,
Printed in Hungary 06-10 IM-01
THE ITT ENGINEERED BLOCKS
SYMBOL AND ENGINEERED FOR LIFE
ARE REGISTERED TRADEMARKS OF
ITT MANUFACTURING
ENTERPRISES, INC.
WARNING: - Hot Water Hazard - Before draining the system, allow water to cool to at least
100F, open the drain valve (take precautions against water damage) and leave the drain valve
open until servicing is complete. Failure to follow these instructions could result in serious
personal injury, death and/or property damage.
WARNING: - Electrical Shock Hazard - Be certain the electrical power is not present at the
motor leads before continuing. Failure to follow these instructions could result in serious
personal injury, death and/or property damage.
WARNING: - High Pressure Hazard - Pressure may be present in the pump body. This
pressure can be relieved by loosening the flange bolts and shifting the pump assembly
slightly to allow the pressurized water to escape. Failure to follow these instructions could
result in serious personal injury and death.
1. Close the valves on the suction and discharge sides of the pump. (if no valves
have been installed, it may be necessary to drain the system.)
2. Disconnect the electrical supply lines to the pump.
