ITS Telecom PanCam-C, Инструкция по установке и программированию

Страница: 26 / 34

Programming
22 PanCam/Pantel/Pancode Installation and Programming Manual
OPERATION COMMAND DEFAULT
Delete a
destination
number assigned
to Day, Night, or
Error DNs. This
command must be
entered separately
for each X value *360 + X + #
where:
X = 1 Day
X = 2 Night
X = 3 Error
Defining the
digit(s) to open
the door from any
extension *441 + XXXX + #
XXXX= Digits (0-9)
Note: Up to 4 digits 8
Changing the
Opening door
Access Code
*442 + 0XXX+#
0XXX = New Access
Code up to four digits.
The first digit of the
access code in Speed-
dial mode must be 0.
If the new access code
is less than four
numeric digits, press the
# key following entry of
the digits. The
allowable characters are
0 through 9. Do not use
the * or # keys. 0123
*For Outdoor
units ONLY
Time between
DTMF’s *460 + X
where:
X = 1-9
(each step is 200 msec) 2 (400)
Conversation time
limit (sec) *462 + XX
XX = Seconds (10-99)
00 = Unlimited 45 sec
Door opening
time limit (sec) *464 + X
XX = Number of
seconds (1-9) 3 sec
Changing the
programming
password *600 + (new password)
Programming access
passwords must be four
numeric digits. The
allowable characters are
0 through 9. Do not use
the * or # keys. 1234