ITS Telecom PanCam-C, Инструкция по установке и программированию

Страница: 23 / 34

Programming
PanCam/Pantel/Pancode Installation and Programming Manual 19
PBX Parameter Commands
OPERATION COMMAND DEFAULT
The Day/Night
DN will be dialed
when the
Call
button is pressed,
respective to
Day/Night mode.
The Error DN is
dialed after
receiving three
invalid Access
Code entries in a
row
*360 + X + DN + #
where:
X = 1 Day
X = 2 Night
X = 3 Error
Destination number
(DN) = Up to 20 digits,
including *, #, Pause,
and A-D characters. For
special character input,
see section 3.6 Entering
Special DTMF
Characters. Day = 0
Night = 0
Error =
No default
Delete a
destination
number assigned
to Day, Night, or
Error DNs. This
command must be
entered separately
for each X value *360 + X + #
where:
X = 1 Day
X = 2 Night
X = 3 Error
Programming the
prefix-digit(s) for
PBX extensions
dialing. When
input to the
PanCam-C/
Pancode begins
with these digits,
the PanCam-C/
Pancode will
process them as
extension dialing *170 + prefix-digit(s) +
#
Maximum 4 digits
(Do Not use * or # as
prefix digit)
To cancel this
operation, enter:
*170 + # No default
Digit(s) to open
the door from any
extension *441 +XXXX + #
where:
XXXX= Digits (0-9)
Note: Up to 4 digits. 8