background image

Filter replacement alert/instruction: 

During Start-up, the air purifier will automatically calculate running 
duration of the filter according to machine’s programmed algorithm. 
Durability of the machine depends on the operating condition. The light 
strips on control panel will flash when filter requires replacement. 
Restart air purifier after replacement. Press and hold the Sleep button 
for 3 seconds to reset the flashing of light strips; the corresponding 
indicator light will turn off and time memory will reset. Air purifier will 
automatically shows the default Particulate Matter (PM) 2.5 condition on 
its control panel.

Timer Setting: 

A series of numbers “0-1-2-3-4-5-6-7-8-9” will be shown after pressing 
Timer button. Air purifier will exit Timer mode with Timer button light 
going off when “0” is selected. If no other operations are carried out or 
no other buttons are pressed within 10 seconds after choosing the time 
length, air purifier will switch to display mode automatically.

Child Lock: 

To activate “Child-lock” mode, press and hold “TIMING” button on the 
control panel for 3 seconds and red light will lit. During this mode, all 
other buttons on the panel is LOCKED. Press and hold this button for 3 
seconds again to exit “Child-Lock” mode.

Fall Prevention: 

When the air purifier is placed in a wrong position (example if it tilts at a
90-degree angle), the machine will power off automatically. The machine 
enters standby mode by default when it is returned to an upright 
position.

Users’ Guide

Technical Specifications

Model          

KJ750F-T02                                                                        

Service Area    

up to 90 m2                                                                                                                                

Power Requirement  

220 Vac / 50Hz / 65W (standby > 2W)                                   

CADR (Particulate)  

750 m3/hr                                                                                    

CADR (Formaldehyde)   225 m3/hr                                                                                    
Filter type         

3 in 1 compact (Pre-filter, True HEPA, Activated Carbon)    

Filter dimension   

235mm  dia x 42mm (Thk) x 400mm (H)                                

Filter Replacement  

8 – 12 months (alert by filter replacement indicator)             

Noise Level     

< 70 dB(A) @ max fan speed                                              

Body Material  

Anodized Aluminium Alloy (Black Color)                                  

Control Method    

Touch Panel, Remote & WIFI Apps

Certificates    

CB / CE / FCC / KC / RoHS

Build in Sensors    

PM 2.5, TVOC, Humidity, Temperature & Light Sensor

Operation Mode  

Manual, SMART, Sleep & Timer

Fan Speed Setting   

Level 1-2-3-4

Fan Motor     

DC Brushless (Nidec)

Fan Type      

Multiple Blade Centrifugal

Safety Operation   

AUTO Off (filter door open or Purifer tilted)                          

Product Dimension   

330mm(L) x 330mm(W) x 806mm(H)                                      

Packing Size      

425mm(L) x 425mm(W) x 1010mm(H)                                    

Casters Wheel  

Four (4) pieces with locking mechanism                              

Other Function   

Night Mode, ANION & Child Lock                                       

Other Features   

Compact Design, Low Noise & Low Power Consumption   

Packing Type 

Double Layer Corrugated Carton                                        

Net Weight   

16 kg                                                                                  

Gross Weight   

19 kg                                                                                          

Содержание EnVure KJ750F-T02









Отзывы: