ITS Telecom ADRA 1000, Инструкция по установке и программированию

Страница: 25 / 64

DTMF Programming
OPERATION COMMAND DEFAULT
digits)
Transfer the call to an
operator
at the end of the
script message.
Operator Ext. is defined by
command *360
*125 + XX + #
where
XX = Script message number (Same
as *100)
Disconnect the call at the
end of the script message.
*140 + XX + * + #
where
XX = Script message number (Same
as *100)
Direct transfer to an
extension.
Enables the user
to directly dial an extension
during playback of a script
message
*170 + XX + first digit(s) + #
where
XX = Script message number (Same
as *100)
first digit(s) = First digit(s) of
extension. Up to four different digits
can be entered.
Reset Scripts to default
values.
This command does
not delete the recorded
*190 + XX + #
where
XX = Script message number (Same
EAR 1000/2000 Installation and Programming Manual 4-7