ITRON OpenWay OWR-1000-001, Руководство по установке

Страница: 19 / 22

C
H A P T E R
3
Troubleshooting
If communication stops or you cannot establish communication between the range extender
and the CENTRON meter or the gas module, try one or all of the following solutions.
•
Use Endpoint-Link software to check the configuration settings of the gas module and
the range extender. These settings should match.
•
Repeat the steps in Configure the 2.4ZR-IPP Range Extender on page 6.
•
Repeat the steps in Link to a CENTRON Meter on page 8.
Important The order in which you perform the magnet swipes when setting up RF
paths is critical. The path between the range extender and the electric meter must be
established first. Then, during the install window, the gas module must have a magnet
swipe to establish its connection to the range extender.
•
If communication continues to fail, contact Itron to replace the 2.4ZR-IPP Range
Extender.
DRAFT OpenWay Installation Guide 13