ITRON OpenWay OWR-1000-001, Руководство по установке

Страница: 17 / 22

Link to the 2.4GZ OpenWay Gas Module
LED
color # of
blinks Definition Action
The gas module could not join to
the range extender. •
If the range extender's install
window has not yet expired, retry
step 1.
•
If the install window has expired,
repeat the procedure
Link to a
CENTRON Meter on page 8.
After verifying the signal quality
on the range extender,
immediately return to this section
and repeat step one.
•
If the gas module still does not
join the range extender, the range
extender should be relocated to a
more suitable location, either
away from physical barriers and
obstructions to provide a clearer
path to the gas module or
physically closer to the gas
module. Afterwards, repeat the
procedure
Link to a CENTRON
Meter on page 8.
None
0
2. After establishing a connection between the gas module and the range extender, return
to the range extender and verify the signal quality.
The status of the connection with the gas module is indicated by the blink pattern of
the green LED. The green LED repeats its blink pattern every minute for the duration
of the install window.
LED
color # of
blinks Definition Action
Green
1
Poor signal quality. Relocate the range extender and repeat
the install process from the procedure
Link to a CENTRON Meter on page
8.
Green
2-5
Acceptable signal quality. No action is needed.
If the signal quality is two blinks or
better, an acceptable radio link has
been established between the range
extender at its temporary mounting
location and both the CENTRON
meter and the gas module.
DRAFT OpenWay Installation Guide 11