Note: The torch light is very strong; so please do not
point at people’s eyes. Our company does not take any
responsibility due to being improper use
Laser
Press the Laser Beam control key, the right will be on.
Note:The Laser is very strong; so please do not point at
people’s eyes. Our company does not take any responsibility
due to being improper use.
Time manager
Alarm clock
Use this function to set alarms to ring at a specific
time. The alarm sounds even when the phone is switched
off.
Set alarm
Press <Select> to access this menu, you can set 3
alarms. Press the navigation keys to select one alarm and
press the left soft key to access the following options:
Set Alarm: Press the navigation keys to select one
short alarm or weekly alarm, and press the left soft key for
confirmation. Then use the alphanumeric keys or the up
and down navigation keys to enter time and press the left
soft key to save your settings.
Clear: Remove the alarm.
Enable alarm: Activate the selected alarm. When
activated, the phone rings at the specific time.
Disable alarm: Deactivate the alarm. When deactivated,
the phone does not ring for the specific time.
Clear all
> 24 <
> 25 <
Note
Temperature Measurement: A) To measure the
correct air temperature, should keep the device away from
the body’s temperature for more than 5 minutes. B) The
temperature may be incorrect, after the long conversation
on the phone, because of the heat generated by phone.
Barometric Pressure Measurement: A) Don’t put the
sensor hole against the wind direction, otherwise the
pressure sensor may work incorrectly. B) Don’t block up
the hole for pressure sensor, because it may cause pressure
measurement slow, or error.
Altitude Measurement: A) Altitude measurement is
based on ARDC model atmosphere ARDC, it’s calculated
with barometric pressure. So the altitude’s accuracy de-
pends on the air pressure’s accuracy. B) The default baro-
metric pressure of the reference altitude is 1013.2hPa.
Compass: A) Hold the device level during compass’s
working, otherwise the compass may work incorrectly. B)
Keep device away from the strong electromagnetic fields,
e.g. electromechanical machine, magnet, high building
and so on, because they can affects the magnetic field.
C) Calibrate the compass before using it for the first time.
D) Calibrate the compass after replacing the battery.
E) Calibrate the compass after exposed to the strong
magnetic field environment. F) Don’t use the loudspeaker
when compass is working. G) Keep the antenna of the
radio in the state like the compass calibration state.
Torch light: Short press the torch light control key, the
light will be on and will be off 20 seconds automatically, but
press the button again within 20 seconds, the light will be
off.
