Making a Conference Call:
Call the first participant in the normal way.
Call the second participant in the normal way. The first
call is automatically put on hold.
To join the first participant to the multiparty call, press
the left soft key to access <Option>:
Mute/Unmute: open or close the microphone.
Build conference: Join the conference.
Release all calls: End all the calls.
Contacts: enter Contacts menu.
Short message: Enter Short message menu.
To add a new person to the multiparty call, call the
person in the normal way, then press the left soft key to
access <Option>, and select “Build conference”.
You can add incoming callers by answering the call and
pressing <Option>, followed by “Build conference”. Re-
peat as required.
During the conference, press the left soft key to select:
Separation: separate one part from multiparty calls for
alone converse;
Release all calls: End all the calls.
Mute/Unmute: Open or close the microphone.
Contacts: enter Contacts menu.
Short message: Enter Short message menu.
Press the end key to end all the calls.
※
Note: Multiparty Call requires network support.
※
> 18 <
> 19 <
Sensor
Buttons
The module has two buttons: MODE on the left and
FUNCTION on the right. And each has two operations: short
press and long press.
Buttons operations
Each button with two operations: short/long press. The
long press means that the button is pressed and hold
for more than 2 seconds. The short press means that the
button is pressed and released quickly.
Buttons functions
Mode Button
Switching Working Mode: In measurement state, scroll
working mode, among TEMP, BARO, ALTI, and COM-
PASS, by mode button ‘s short pressed.
Enter/Exit Setting State: Enter/Exit setting state by the
mode button ‘s long pressed.
Switching Setting Options: In setting state, the setting
option is scrolled by mode button ‘s short pressed.
Function Button
Power on/Power off: Shutdown/boot-strap system by
FUNCTION button’s long pressed.
Turn on back-light: In normal state, back-light can be
turned on by function button’s short pressed, and keeps
for about 8 seconds.
Setting Parameters: Value of the current selected
parameter can be changed by function button’s short
pressed.
