
DISPLAY VA-01
USER’S MANUAL
5. INSTALLATION IN ANEMOMETER 100, 200 & 300 SERIES
STEPS TO FOLLOW
3. Connect (with a wire) the display to the previous circuit, taking into account the position of the
wires indicated on terminals A and B for the circuit and the display.
6. RECYCLING
INFORMATION FOR THE PROPER MANAGEMENT OF ELECTRIC AND ELECTRONIC
DEVICES
(RAEE)
The equipment’s refuses should never be mixed with general refuses. These refuses can be
delivered, without any extra cost, to the centers of refuse collection. For further information, please
contact your local authorities
.
To recycle an electronic device separately from the general refuses avoids possible negative
consequences for the environment. Furthermore, it allows a proper recycling process for all the
pieces.
This implies both energy and resources saving.
This symbol is marked in all products. It highlights both the obligation to collaborate with the
refuse collection and the warning of not using traditional containers for the elimination of the products.
Figure 6
Figure 7
1. Open the anemometer siren and
unscrew the 2 screws securing
the
printed
circuit
board.
(
figure 6
).
2. Remove the board an connect the
circuit AHG3802Vxx to it (
figure 7
)