Itowa TUNNER SETS, Руководство пользователя

Страница: 17 / 23

ItowaK
TUNNER SETS
USER MANUAL
11
6.4. BATTERY CHARGING
The batteries supplied with ITOWA equipment do not have a memory effect, meaning that they can be
charged without having to be totally flat. Therefore, in order to lengthen their life span, it is
recommended to use one battery every half day of work.
7. DISPLAYING THE CODE
7.1. DISPLAYING THE CODE OF THE SET
If you want to know the code of the set, the receiver can display it by turning on jumper J1 of the base
plate.
To start displaying, place the jumper in the position indicated in the following figure:
The presentation sequence of the code will start through the LEDS. The hexadecimal value of each
group will be represented by a LED of the front panel of the receiver through a number of flashes equal
to this value, starting with LED S1 with the first digit of the code (reading from left to right).
The following table shows the correspondence between the hexadecimal value of each digit and the
number of flashes corresponding to the LED it represents.
Code carácter (Hexadecimal value)
0 1 2 3 4 5
6
7
8
9 A B C D E F
Number of pulses (Decimal value) 0 1 2 3 4 5
6
7
8
9 10 11 12 13 14 15
Bear in mind that once the receiver detects the position of jumper J1, the test of all the LEDs is carried
out without interruption. Between the presentation of one LED and another, all the LEDs flash as a
separation mark. If the position of Jumper J1 is changed during the test, the sequence is not
interrupted. For better understanding of this process, an example of the code and the resulting display
is given. The code of the example is: 01A38E
Led S1 S2 S3 S4
Code 0 1 A 3 8 E
Number of pulses 0 1 10 3 8 14
VA001228