Itowa TUNNER SETS, Руководство пользователя

Страница: 16 / 23

ItowaK
TUNNER SETS
USER MANUAL
10
6.1. MAINTENANCE OF THE TRANSMITTER
¡ATTENTION!: BEFORE HANDLING THE TRANSMITTER, TURN OFF THE GENERAL
SWITCH OF THE MACHINE.
The good condition of the transmitter should be checked, paying particular attention to joints and rubber
protections of the various parts. Replace immediately is they have been cut or damaged as the result of
improper use of the apparatus.
Check the contacts of the battery holder ensuring that they are clean and free of rust, and that the spring
return force is correct.
6.2. MAINTENANCE OF THE RECEIVER
Maintenance of the receiver is identical to the transmitter. The following parts should be checked:
· The connection between the receiver and the electrical equipment of the machine.
· The correct working order of the active and passive safety circuits.
· The correct working order of all the leds display messages.
· The receiver cover and packing gland should be properly sealed.
· The firm fastening of the whole unit.
· If the antenna is exterior, check that the connection is clean and free of rust.
To check the working order of the active safety circuit, simply press the STOP BUTTON while the remote
control is on. The general contactor should drop immediately.
To check the working order of the passive safety circuit, remove the battery from the transmitter. The
general contactor should drop after within a maximum of 1.9 seconds.
6.3. MAINTENANCE OF THE CHARGER
The following parts should be checked:

Contacts (which should be clean and free of rust).

The correct display and indication of the leds.
¡ATTENTION!: IF YOU DETECT ANY ANOMALY IN THE WORKING ORDER OF THE SET,
IT SHOULD BE IMMEDIATELY SWITCHED OFF.
If you have any doubt or enquiry, contact our Technical Assistance Service or any of our authorised
technicians.