Itowa ITW 4 LEVEL, Руководство пользователя

Страница: 18 / 24

ITW LEVEL
USER MANUAL
14
5
. CHANGE OR FREQUENCY
In case that the system does not link correctly due to the interferences in the programmed
frequency band, the working channel can be changed manually.
NOTICE: THE CHANGE OF WORKING CHANNEL MUST BE DONE IN THE
TRANSMITTER AND IN THE RECEIVER.
YOU MUST MAKE SURE TO ASSIGN THE CORRECT FREQUENCY BAND
ACCORDING TO THE RADIO MODEL OF YOUR SYSTEM.
The change of frequency can be done indistinctly, when the system is working or without
power.
It is recommended to start the change of frequency on the receiver system and after on the
transmitter. In case that the systems were working, the change will be done after 10 seconds
approximately.
To make the change you must open the system and to log into the changing frequency
control board.