UPDATE, RESTART, AND ERASE
Update Fitness Tracker Firmware
If there is a new firmware update available for your iTouch Slim,
you will receive a pop-up notification to download it within the iTOUCH Wearables app. If you do not
receive said notification, tap the device icon from the navigation bar. Then go to
Update Firmware
where you will see a red dot on the Update Firmware tab, signifying that an update is available. Tap
the Update button to begin updating your iTouch Slim. Be sure that your fitness tracker remains
within Bluetooth range of your phone while updating. Once your update is completed, your watch
will automatically reset.
Restart Your Fitness Tracker
If you can’t sync your iTOUCH Slim, or if you have trouble with connect-
ed GPS or tracking your stats, you can restart your tracker from your wrist. From your fitness tracker,
navigate to the
Turn Off
screen by tapping the Home button. Then, tap and hold the Home button to
power off your tracker. Once your watch has fully powered off, hold the Home button for 3 seconds
to turn on your fitness tracker.
WEAR AND CARE
All iTOUCH Wearable products are meant to be worn all day and night, so it’s important to follow a
few simple guidelines as you wear and care for your device.
To keep your band clean and your skin happy, we recommend the following tips:
• Clean your band and wrist regularly - especially after intense workouts or sweating.
• Rinse the band with water or wipe it with a small amount of rubbing alcohol. Do NOT use hand
soap, dish soap, hand sanitizer, cleaning wipes or household cleaners, which could get trapped
beneath the band and irritate your skin.
• Always pat dry the band before putting it back on
Note: Although iTOUCH Slim is waterproof, it is not good for your skin to wear
a wet band for long periods of time.
To change the bands on your iTOUCH Slim Fitness Tracker, just follow these simple instructions:
1.
Hold one of the straps in one hand and the watch face in the other and pull apart until separated.
Repeat this process to remove the other strap.
2.
To insert a new strap for your smartwatch, snap the straps into either side of the watch face until
they fascine into place.
Make sure to wear your band loosely enough that it can move back and forth on your wrist.
Prolonged rubbing and pressure may irritate the skin, so give your wrists a break by removing the
band for an hour or two after extended wear.
IMPORTANT TIPS:
If you have allergies, asthma, or eczema, you may be more likely to experience a skin irritation or
allergy from a wearable device. If you start to experience skin irritation or redness on your wrist,
remove your device. Contact a dermatologist if symptoms persist longer than 2-3 days of not using
your wearable device.
Turn Off
V1.7.9
