RAIL TITAN OPERATOR’S MANUAL
11
www.itmtools.com.au
Rail Titan
This document is protected by copyrights.
Copying, using,
or distributing without permission of PROMOTECH is prohibited.
11
If a semi-flex rail is put on a curve
, before you attach more rails use the 4
mm hex
wrench to loosen the screws of the connecting plates (
1
) and of the racks (
2
). Next,
attach the rails, clamp them with levers, and then tighten the connecting plates. Put
the rack adjustment tool (not included) into the hole (
3
), and rotate the tool to the left
(
4
) to remove the gap (
5
) between the racks. Then, tighten the leftmost screw and
the rightmost screw of each rack (
2
).
1
2
5
3
4
