MKR-LTG
DOC-MKR-LTG-MNL Rev2.doc (3/24/2021)
Copyright 2019-2021 ITL, LLC Page 8 of
13
Installation Wiring Diagram
Sample connections for typical LED obstruction lights are shown in the diagrams below.
Grounding
The metal base of the Side Light must be grounded as shown. The grounding screw
includes a square washer which accepts stripped copper wire or terminal lugs.
Do not remove the power supply ground wire (green wire with red ring lug) from the
grounding screw. Do not cut the green power supply ground wire.
Failure to ground the Side Light base as shown can result in Electrical Shock Hazard,
Compromised surge suppression, and voiding of warranty.
Electrical Shock Hazard
Compromised surge suppression
Voiding of Warranty
MKR-LTG1-0IR Single and MKR-LTG2-0IR Double Obstruction Wiring Diagram
MKR-LTE1-0xx Single Grounding Detail
It is the responsibility of the installer to comply with all applicable local, state,
and federal regulations for installation and operation of this device.
Power Supply Ground Wire
