background image

       

 

IFH-1710 Red/Infrared LED Beacon

DOC-1710-MNL Rev20.doc

  (10/7/2019)                   

 Copyright 2009-2019 ITL, LLC                  Page 22 of

 

22 

 

Revision 

Description of Change 

10/7/2019 

Preparer / Approval 

20 

Changed from ETL certified to Complies with FAA AC 150/5345-43H 

2/28/2019 

Prepared By: Ryan Gregory 

Approved By: Andy Rudolph 

19 

Added language to address lack of interlock switch 

2/28/2019 

Prepared By: Ryan Gregory 

Approved By: Andy Rudolph 

18 

Removed references to optional for ADS input 

3/2/2018 

Prepared By: Ryan Gregory 
Approved By: Andy Rudolph 

17 

Updated Block Diagram, Wiring Diagram & Part List for Photo Diode 
ITL-0730-PHD. 

2/19/2018 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

16 

Updated to reflect new ITL-0720-CTL Revision. 

12/20/2017 

Prepared By: Ryan Gregory 
Approved By: Andy Rudolph 

15 

Updated warranty from two years to five years. 

12/11/2017 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

14 

Added IFH-1710-0IR information.  Updated ETL certified reference to 
43H. 

10/31/2017 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

13  

Updated Replacement Parts List (pg19) Replaced TOL-1700-LED with 
TOL-1700-LED-2. 

4/4/2017 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

12 

Updated Figure 11. 

8/24/2016 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

11 

Added description of optional Flash Inhibit Input. 

5/4/2016 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

10 

Corrected flash rate switch description for SW2. 

4/13/2016 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Updated power consumption specifications. 

12/8/2015 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Updated Flash Head Dimensions and Mounting Detail 

8/4/2015 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Replaced ITL-1700-KIT with KIT-1700-LED & updated description 
(Figure 12 Flash Head Parts List Table) 

5/12/2015 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Added installation note “All fixtures, enclosures and junction boxes 
…”, Added maintenance outline. 

8/29/2014 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

5c 

Corrected switch number reference SW1 to SW2 in Setup and 
Operation 

10/23/2013 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

5a/b 

Change coversheet description from ILS-1710 to IFH-1710, updated 
voltage in trouble-shooting section, 

9/04/2012 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Updated FAA type from L-864 to L-864(L),  
Changed length of cable from 75ft to 50ft. 

6/25/2012 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Updated DIP switch descriptions for SW1-5 and SW1-6 

5/2/2012 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

2a 

Updated Itl logo, add Toll free number  

9/20/2011 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Add wiring diagram  

9/23/2010 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Issued 

5/17/2010 

Prepared By: Elke Hinson 
Approved By: Andy Rudolph 

Содержание IFH-1710 Series























Отзывы: