Itho Daalderop 53-00355, Руководство пользователя

Страница: 10 / 16

10
e) Drill a hole for the power cable in the rear of the enclosure,
or go to step f if a cable tray is used. Go to step h if no cable
tray is used.
f) Power supply connection with cable duct:
j) Mount the cable with the supplied strain relief. Connect the
wiring as indicated in the chapter "Connecting the power
supply".
k) Mount the cover plate on the fan and screw it on.
g) Prepare and mount the supplied wire grommet on the top
side.
h) If necessary, set the desired flow rate according to the
section Setting the flow rate.
l) Replace the housing.
i) Place the fan (with the supplied white foam between the wall
and the fan to reduce vibrations and air leakage) and screw it
into the wall or ceiling.