Itel STL-SAT Changeover, Руководство пользователя

Страница: 37 / 57

37 Control Software
© 2018 ITEL SNC
3.2.4.7 SNR on MPX
MPX Noise: Enables the exchange under condition of exceeding the threshold noise.
MPX Noise threshold dB: MPX channel noise response threshold level, reading and the value set here
refers to the 0dB level.
3.2.5 SMS - GPIO Settings
SMS Machine enabled: Enable communication alarms by SMS.
It is possible to enter four phone numbers to which the alarms will be sent by the device, each number
should be entered with the international prefix (eg +39 for Italy).
Each number must be enabled (Enabled) and, if you want these alarms to be forwarded, the "RouteAlarms"
flag must be enabled.
If the number is not enabled, it is as if this is not present in the device and can not receive alarms or send
commands or status requests.
However, if you do not set the RouteAlarms flag, no alarms will be sent to the number, but you may be
prompted for the status and send commands.
GPIO Enabled:
If enabled, enable the inputs of the GPIO port.
If idle, GPIO port outputs will be active, while the unit will no longer receive commands from it.