4
www.itec-audio.de
SONG DISPLAY / REMOTE CONTROL RC.12
PROGRAMMABLE MODE
You can access programmable mode by pressing PROG You can select from 4 different sequences that you
can create yourself.
First, select one of the 4 confi gurations.
Remark: You can change the name of the sequence by pressing PROG a second time.
The program menu offers following options:
1. Start:
An existing sequence is started.
jump to the next song
jump back to the previous song
OK
display the selected text on the display
C
clear the display
During the run of the sequence, you can always enter a song number manually or change a strophe.
EXIT always brings you back to the previous step in the menu.
2. Input:
Enables you to create a new sequence. If the selected slot already contains a sequence, you
will
be prompted if you want to replace or edit it.
First, choose 1 for “new” or 2 for “edit”
Then, select the sequence step using the + and – keys and enter the song number and
strophe number as usual.
Every line has to be confi rmed by pressing OK
Press the + key for the next step.
After all sequence steps are complete, press OK a fi nal time to save your sequence. You will be prompted
one last time.
Other possibilities to edit in INPUT mode:
PROG enter a new step before the current step
C
clear the current text
create a new step after the current step
EXIT brings you back to the previous step in the menu without saving the sequence.
3. Preview:
Preview starts the selected sequence. After the last number, the display will darken for a
short
while, after which the preview starts again.
EXIT brings you back to the previous step in the menu.
+
-
+
SONG DISPLAY
