www.itec-audio.com
3
MULTIPOWER
MULTIPOWER
SAFETY INSTRUCTIONS
Please read this manual carefully before turning on the ITEC MULTIPOWER. Keep it in a safe place
where you can fi nd it easily for future reference.
Train all personnel who will use the device regarding use and safety instructions especially.
Do not cover the ventilation shafts of the device by any means. If you mount it in a rack you have to ensure
proper air circulation. Mounting the device in a closed wooden furniture is not permitted entirely.
You must use a grounded plug socket when charging or operating the device. Make sure the power
cord is not damaged. Never disconnect the ground conductor of the power plug.
Make sure the voltage indications on the back of the device match those of the available power grid
BEFORE plugging in the device.
Un-plug the device during thunderstorms or when not using the device for longer period of time.
In case of any of the following conditions, the device has to be checked by qualifi ed staff:
-
Damage to the power cord or power plug.
-
Liquids or small objects have entered the case
-
The device does not operate a usual
-
The device was exposed to a strong impact
-
The case has been damaged
Storing the device in humid conditions, operating it in poring rain or near splashing
water could cause damage.
Avoid exposing the device to temperatures above 50°C or humidity above 95%.
Do not try to open the device. There are no serviceable parts inside. In case of damage or problems
always contact your dealer or the manufacturer.
Use a soft, dry cloth to clean the device. Do not use any cleaning agents or thinners. These could
damage the case or enter the case. Un-plug the device before attempting to clean it.
CAUTION:
Professionals servicing the device have to switch it off fi rst and unplug the power cord.
