1 GENERAL DESCRIPTION
Simplicity in irrigation control.
Control of 96 blocks through 50 irrigation programs with 15 daily starts up. Easy and intuitive programming allows the
user to avoid schedule problems such as valve overlaps. Automatic filters cleaning and pumps starter function are
available, as well as the Watering Factor to modify the duration of all the irrigation programs.
Precision in dosing.
Fertigation control by means of 48 programs, which can be linked to the watering programs. The PIQ algorithm
developed by ITC, can control the addition of 6 different products proportionally to water flow and simultaneously
according to EC and pH set points.
1. GENERAL DESCRIPTION
1.1 EQUIPMENT DESCRIPTION
WATER CONTROLLER 3000
SWITCH
RUN W+F : Irri Fertirrigation
RUN W: Irrigation (calibration)
STOP (calibration)
CONSOLE
DOSING
PUMPS
OUTPUTS
SENSOR
INPUTS
OUTPUTS
FIELD ELECTROVALVES
PUMPS
FILTERS
1.2 CONSOLE DESCRIPTION
ESC
ENT
Start:12:45
12:55Tu (AC)
00:45
PH 7.5
EC 1.5mS
250
m3h
Q
5.4bar
MW09F02
Start time and
time left to finish
the program
EC, pH, Q (flow) and P, readings
flashing when alarm on
Day identification: A/B and C/D/E
C2
Communication with module 2 is lost. C2 flashes.
Cleaning Filters
INPUTS
IRRIGATION ACTIVATION
FILTERS CLEANING
MAIN SCREEN DESCRIPTION
DESCRIPTION OF THE KEYBOARD
Active irrigation and fertirrigation programs
+ / - to increase / decrease a value.
< / > menús broser
ESC To finish a menu without saving
ENT To enter a menu and to validate a value
Watering factor >100% ( ), <100% ( )
(M) Manual activation of the program
Filters cleaning
USER'S MANUAL
WATER CONTROLLER 3000
4
