ITC T-1D120R, Руководство по эксплуатации

Страница: 5 / 22

3
1. High efficiency class D power amplifier;
2. Standard cabinet design(1.5U), humanized design, exquisite craft, all show high temperament;
3. Built-in active bandpass filter, filter out unwanted music signal effectively;
4. Balance signal input, 1/2/4x 120W, 240W, 350W, 500W power output;
5. Panel was regulating function independently;
6. Panel with signal, peak, protection, the power indicator LED;
7. With amplifier output, power standby control normal monitoring, power amplifier
standby cascade port;
8. Power amplifier with DC24V power supply port, charged pressure to adapt to the range
(21.6~ 26.5V DC) protection, avoid long-term supply for battery failure or damage of high voltage
equipment;
9. AC alternating current power supply pressure;
10.Power amplifier output: 100V voltage;
11.Electrical equipment electrical isolation, signal input and the power output isolation, in line with
the 3C, UL\ IEC60065 certification requirements;
12.Built-in short circuit, overload, high temperature protection.
13."STBY IN" sibling with "STBY thru", Normal when the port outputs high level, short of the port, the
amplifier standby protection panel "STBY" red indicator light; amplifier standby time and work
"STATE OUT" output 5V, when the amplifier output short circuit protection, the port output low.
14.When the channel "LINE IN" input signal, the corresponding port access VCA 10K adjustable
resistance, adjustable size of the input signal.
15.Supporting the RS232 ,communication protocol via RS-232 serial remote control of the amplifier
cascade standby computer, read amplifier status, can remotely adjust the signal sizes.
2.FEATURES