4
5
OPERATION
1. Check reel for correct operation by slowly pulling out hose. A clicking noise will be heard every half revolution
of the drum.
2. To latch the reel, pull out the hose and allow it to retract after hearing the first, second, or third click.
3. To unlatch, slowly pull out the hose until the clicking noise stops, then let hose retract until the hose stopper rests
against the hose guide.
4. If necessary, adjust spring tension on reel by adding or removing wraps of hose from spool, one wrap at a time,
until desired tension is obtained. Add wraps to increase tension. Remove wraps to decrease tension.
WARNING:
Do not open the cover (#10) at will. It is very dangerous and can cause personal injury or death.
See picture below.
MAINTENANCE
1. Make sure the hose is in proper working order.
2. Clean the hose with a cloth dipped in warm water to remove dirt or deposits and ensure correct rewinding.
3. Do not use detergents or solvents which could prove incompatible with cable-winder materials.
4. Dismantling of the unit by unskilled personal could prove hazardous; the risks involved mainly concern the
preloaded springs.
LIMITED WARRANTY
1. The manufacturer warrants this hose reel against defects in material and craftsmanship, for a period of 24 months
from date of purchase, but not including hose and O-ring parts.
2. Manufacturer’s liability is limited to replacement or repair of defective material within the warranty period, when
returned freight prepaid to the distributor or their designated service depot.
3. The warranty does not cover damage caused by accident, misuse, or faulty installation.
4. The reel must be installed and maintained in compliance with the instructions.
WARNING
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment,
such as those dust masks that are specially designed to filter out microscopic particles.
Don’t Open!