ITC Dositec mA, Руководство пользователя

Страница: 20 / 40

20
DEFAULT PARAMETERS
Measure selection pH
Setpoint 7.2
Hysteresis 0.1
Control ácido
ON/OFF - Proporcional control ON/OFF
Proportional control start value Set point+1pH
First point calibration procedure ---
Second point calibration procedure ---
Lowest Alarm value 0.00
Highest Alarm value 14.00
Over-dosing alarm value 99:59 (h:m)
Menu: BASE / FULL BASE
Password Disabled
Delay powering on 00:03 (m:s)
Delay exit calibration menu 05:00 (m:s)
Calibration 4 mA output 4 mA
Calibration 20 mA output 20 mA
TYPICAL CHARACTERISTICS
Room temperature 0-40ºC
Max. Current relay output 6A (resistive load)
1A (inductive load)
4-20mA output 4-20mA (dynamic 0-500Ohm)
pH measure 0-14 (0.01 pH)
ORP (mV) measure -1000 - +1400 (+/-1mV)