3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-us.com • [email protected] • Revision 6: 05/29/19
6.
See wiring diagram below for power supply wiring instructions.
AC Power
120V/277V
= Wire Nuts or Terminal Block
120V/277V -
24V Class 2
Power Supply
AC
DC
Brown (L)
Black (L)
Blue (N)
White (N)
Black (-)
Red (+)
Red (+)
Black (-)
Compel Light
Connector
Cord
4.
Plug the 12” connector cord into the light making sure to be
careful not to damage the connector pins inside the light. Then,
place the light in desired location.
5.
If wiring multiple lights use a jumper cable to connect two lights
together. If using only one light simply plug a pigtail (ordered
separately) into the 12” connector cord and then wire to the
power supply as shown in Figure 1.
Make sure cord
snaps over raised
portion
Wiring with the 2” Add-On
Wiring to Pigtail
Barrel connector cord option
