4
ENGLISH
FRANÇAIS
!
!
WARNING:
Before attempting to use your tool, familiarize yourself with all
operating features and safety requirement.
SWITCH
This impact wrench is equipped with a rocker switch that switches rotation from
FORWARD to REVERSE easily, allowing fasteners to be broken loose quickly.
n
Pressing the BOTTOM part of the switch causes the impact wrench to move
FORWARD (right-hand thread) direction.
n
Pressing the TOP part of the rocker switch causes the rotation to reverse.
INSTALL/REMOVE SOCKET
To install a socket on the anvil, align the hole of the socket with the anvil and push
firmly.
To remove a socket from the anvil, pull the socket out firmly.
CAUTION:
Always disconnect tools from electrical power before performing any
inspection, maintenance, or cleaning.
● Do not attempt to make any adjustments while the tools is in operation.
● Do not let solvents like brake fluid, gasoline, petroleum-based products, etc.,
contact plastic parts of the housing. Many household cleaners also contain
damaging chemicals. Cleaning with any of these substances can harm the
plastic and compromise the integrity of the double insulating system.
● Keep the vents clear of dust and debris. This will help prevent possible electri-
cal shorts and ensure proper cooling.
● Keep the tool housing clean, free of oil and grease by using mild soap and a
damp (not wet) cloth.
● Inspect the cord regularly and have it replaced by an authorized repair facility if
it is damaged.
● This impact wrench will require lubrication after 30 continuous hour or 50 inter-
mittent hours of use. Refer to the parts diagram or contact an approved service
center for lubrication services.
● An authorized repair centre should do any repairs, modification, or maintenance
that involve disassembling the tool.
● Any damage to the tool should be corrected at an authorized repair centre.
OPERATING PROCEDURES
MAINTENANCE
PARTS LIST
Please refer to Schematic Drawing on page 19.
N
o.
DESCRITPTION
QTY.
1
Gear box
1
2
Friction bearing
1
3
Shield
1
4
O-ring
1
5
Spindle
1
6
Impact block
1
7
Steel ball 5
23
8
Sping
1
9
Steel ball 7
2
10
Drive spindle
1
N
o.
DESCRITPTION
QTY.
11
Gear
1
12
Washer
3
13
Washer
1
14
Bracket
1
15
Gasket
1
16
Gear box cover
1
17
O-ring
1
18
6000 Bearing
1
19
Bearing cover
1
20
Armature
1
