ITB ARCHIMEDE 3000, Руководство по эксплуатации

Страница: 19 / 40

Italian Technology of Broadcast
User's Manual
ARCHIMEDE 3000 AR
432
Page 19 of 40
After some seconds the “CPU” will start the sequence of start up. If at the end of the sequence the “SWR”
shall be within the limit the transmission will continue otherwise it will fall back into the alarm cycle.
Warning: If the alarm cycle is repeated for 5 times in a few hours the Amplifier will stop.
To restart the Amplifier turn off for some seconds the main power supply 230 Volt and then turn it on.
Please check if the output impedance is 50 Ohm
TEMPERATURE ALARM
When the CPU detects that a temperature sensor provides a value above the scheduled threshold, the
standby process begins and on the display will be shown the flashing written
T e m p e r a t u r e S T O P
The Equipment will stay in alarm until the temperature will come back within normal ranges.
Warning: If the alarm cycle is repeated for 5 times in a few hours the Amplifier will stop.
To restart the Amplifier turn off for some seconds the main power supply 230 Volt and then turn it on.